• 中国计算机学会会刊
  • 中国科技核心期刊
  • 中文核心期刊

J4 ›› 2014, Vol. 36 ›› Issue (09): 1650-1655.

• 论文 • 上一篇    下一篇

智能卡COS的快速烧写技术研究与实现

黄一平1,农丽萍2,苏检德1   

  1. (1.广西师范大学电子工程学院,广西 桂林 541004;2.广西师范大学物理科学与技术学院,广西 桂林 541004)
  • 收稿日期:2013-03-04 修回日期:2013-06-08 出版日期:2014-09-25 发布日期:2014-09-25
  • 基金资助:

    2012年广西师范大学青年基金资助项目

Research and implementation of the
fast burning technology of smart card COS     

HUANG Yiping1,NONG Liping2,SU Jiande1   

  1. (1.College of Electronic Engineering,Guangxi Normal University,Guilin  541004;2.College of Physics and Technology,Guangxi Normal University,Guilin 541004,China)  
  • Received:2013-03-04 Revised:2013-06-08 Online:2014-09-25 Published:2014-09-25

摘要:

对智能卡COS现有USB、串口读写器的烧写技术进行了研究与分析,提出了一种以ARM处理器为母片硬件平台,通过智能卡接口对其他智能卡COS进行快速烧写的片拷贝方法。该方法具有硬件设计简单、烧写速度快,稳定性、安全性高等优点,且易于扩展为批量智能卡COS烧写器平台。目前该技术已在贴片智能卡生产厂商得以全面应用,大大提高了COS的烧写效率,具有较好的应用前景。

关键词: 智能卡, 卡片操作系统, 片拷贝, 烧写器

Abstract:

Through studying and analyzing the existing reading and writing technology of USB and serial readerwriter of smart card COS, a master hardware platform based on ARM processor is proposed. This method is a kind of fast burning copy method, i.e. fast burning the other smart cards’ COS through special interface of smart cards. Furthermore, the method features multiple advantages such as simple hardware design, fast burning, high stability and high safety, and it is easily extended to be the burning platform for a batch of smart card COS. At present, this technology has been extensively applied by the paste smart card manufacturers and increased the COS burning efficiency considerably, proving that it has a good application prospect.

Key words: smart card;COS;chip copy;programmer