[1]Wang Tao.Research on working parameter adjustment methods of pumping well and screw pump well [D].Daqing:Northeast Petroleum University,2013.(in Chinese)
[2]Zhou Wei-hua, Wu Yun-li, Wang Pan-hu, et al. Research and implementation on pumping well anti partial-wear technology [J].Journal of Oil and Gas Technology,2011,33(5): 290-291.(in Chinese)
[3]Ming Hong-fang. Study on visual simulation network software system of eccentric wear between tubing and rod in rod pumping wells [D].Qingdao:China University of Petroleum (East China),2013.(in Chinese)
[4]Zhang Zhong-hui.Study on the rod and tube partial-wear’s three-dimensional visualization technology [D].Qingdao:China University of Petroleum (East China),2009.(in Chinese)
[5]Guo Xiao-pan,Duan Tian-xiang.Research on the development of visualization technology of well trajectory [J].Special Oil and Gas Reservoirs,2003,10(5): 54-56.(in Chinese)
[6]Sanstrom B,Longorio P.Innovation 3D visualization tool promotes development drilling efficiency [J].Oil & Gas Journal,2002,100(8):79-85.
[7]Zhang Dong-mei, Zhou Ying-cao, Jiang Hong-wei, et al. Development status of foreign oil drilling software [J].Petroleum Technology Forum,2012,31(3): 46-50.(in Chinese)
[8]Xu Kan-she.Research and development of well trajectory calculation and visualization system [D].Xi’an:Xi’an Shiyou University,2012.(in Chinese)
[9]Yang Kun,Wu Xiao-dong.3D visualization technique used for designing the installation of well centralizer [J].Oil Drilling & Production Technology, 2009,31(5):56-59.(in Chinese)
[10]Rao Jian-hua, Liu Hong-zhao, Dong Jiang-feng, et al. The visual setting of centralizer and the friction simulation of sucker rod string in directional well [J].Offshore Oil, 2006,26(2): 75-79.(in Chinese)
[11]Yang Yong,Shao Bing,Wang Feng-rui,et al.String mechanical model for complex-structure wells and dynamic 3D digital shaft [J].Acta Petrolei Sinica.2015,26(3): 385-394. (in Chinese)
[12]Liu Shou-shan.The technology of digital visual oil well research and implementation [D].Changchun:Jilin University,2009.(in Chinese)
[13]Su Bu-qing,Liu Ding-yuan.Computational geometry [M].Shanghai: Shanghai Scientific & Technical Publishers,1980.(in Chinese)
[14]Chen Tie-zheng,Lu Gang.Discussion on the spline interpolation for well trajectory coordinates calculation [J].Sino-global Energy,2007,12(3): 26-28.(in Chinese)
[15]Liu Chun-hua.Study on the mechanism of sucker rod partial-wear and the control measure [D].Qingdao:China University of Petroleum (East China), 2009.(in Chinese)
[16]Jamshidi E.A new approach to well trajectory optimization based on rate of penetration and wellbore stability [J].Petroleum Science and Technology, 2011,29(6):588-600.
[17]Zare M R.Determination of optimal well trajectory during drilling and production based on borehole stability[J].International Journal of Rock Mechanics and Mining Sciences,2012,56(15):77-87.
[18]Xu H,Hu Q. Approximating uniform rational B-spline curves by polynomial B-spline curves [J].Journal of Computational and Applied Mathematics,2013,244(1):10-18.
[19]Jiang Nan.Research of coordinate transformation algorithm and software implementation[D].Huainan:Anhui University of Science and Technology,2013.(in Chinese)
[20]Zhao Jing,Du Zhon-hua,Zhao Yong-ping,et al.Simulation for air resistance coefficient of one-dimension trajectory projectile based on cubic B-spline curve [J].Fire Control & Command Control, 2015,40(4):123-126.(in Chinese)
[21]Peng Xiao-jun,Song Xu-ding.The effect of different parameterization of polynomial interpolation NURBS curves [J].Machine Manufacturing, 2013,21(3): 33-37.(in Chinese)
[22]Nie Jie.Study on the mechanism of the wear between casing and sucker rod in three-dimensional hole well.[D].Xi’an:Xi’an Shiyou University, 2014.(in Chinese)
[23]Zhang Jie.Stability analysis and deformation simulation of sucker rod [D].Qingdao:China University of Petroleum (East China),2011.(in Chinese)
附中文参考文献:
[1]王涛.抽油机井和螺杆泵井工作参数调整方法研究[D].大庆:东北石油大学,2013.
[2]周伟华,吴云利,王盘虎,等.抽油机井防偏磨技术研究与实施[J].石油天然气学报,2011,33(5): 290-291.
[3]明红芳.抽油机井杆管偏磨仿真可视化网络软件系统研究[D].青岛:中国石油大学(华东),2013.
[4]张中慧.杆管偏磨的三维可视化技术研究[D].青岛:中国石油大学(华东),2009.
[5]郭小攀,段天向.井眼轨迹可视化技术的发展研究[J].特种油气藏,2003,10(5): 54-56.
[7]张冬梅,周英操,蒋宏伟,等.国外石油钻井软件的发展现状[J].石油科技论坛,2012,31(3): 46-50.
[8]徐堪社.井眼轨迹计算及可视化系统研究与开发[D].西安:西安石油大学,2012.
[9]杨坤,吴晓东.应用井筒三维可视化技术设计油井扶正器安装位置[J].石油钻采工艺,2009,31(5):56-59.
[10]饶建华,刘宏昭,董江峰,等.定向井有杆抽油系统扶正器可视化设置及仿真[J].海洋石油,2006,26(2): 75-79.
[11]杨勇,绍兵,王风锐,等.复杂结构井管柱力学模型及动态三维数字井筒[J].石油学报,2015,26(3): 385-394.
[12]刘守善.油井数字化可视技术的研究与实现[D].长春:吉林大学,2009.
[13]苏步青,刘鼎元.计算几何[M].上海: 上海科学技术出版社,1980.
[14]陈铁铮,鲁港.实钻井眼轨迹坐标计算的样条插值法的讨论[J].中外能源,2007,12(3): 26-28.
[15]刘春花.抽油杆偏磨机理及防偏磨对策研究[D].青岛:中国石油大学(华东),2009.
[19]姜楠.坐标转换算法研究与软件实现[D].淮南:安徽理工大学,2013.
[20]赵静,杜忠华,赵永平,等.机械制造基于三次B样条曲线的一维弹道修正弹空气阻力系数拟合[J].火力与指挥控制,2015,40(4):123-126.
[21]彭小军,宋绪丁.不同参数化法对多项式NURBS插值曲线的影响[J].机械制造,2013,21(3): 33-37.
[22]聂洁.三维井眼油井杆管偏磨机理研究[D].西安:西安石油大学,2014.
[23]张洁.抽油杆柱稳定性分析与变形仿真[D].青岛:中国石油大学(华东),2011. |