司钻控制房视觉工效评价研究

J4 ›› 2014, Vol. 36 ›› Issue (08): 1538-1543.

司钻控制房视觉工效评价研究

邓丽1,2，余隋怀1，初建杰1，张婉玉1

（1.西北工业大学工业设计研究所，陕西西安 710072;2.西南石油大学机电工程学院，四川成都 610500）

收稿日期:2013-02-25 修回日期:2013-04-12 出版日期:2014-08-25 发布日期:2014-08-25
基金资助:
国家863计划重点资助项目（2007AA040406）

Research on visual ergonomics evaluation of driller control room

DENG Li1,2，YU Suihuai1，CHU Jianjie1，ZHANG Wanyu1

(1.Institute of Industrial Design,Northwestern Polytechnical University,Xi’an 710072;
2.School of Mechatronic Engineering,Southwest Petroleum University,Chengdu 610500,China)

Received:2013-02-25 Revised:2013-04-12 Online:2014-08-25 Published:2014-08-25

摘要/Abstract

摘要：

针对传统视觉工效评价中人工计算和作图误差的问题，在分析人体视野特性的基础上，引入了汽车视野设计原理中的眼椭圆和H点，结合计算机辅助人机工程设计技术，建立了石油钻机司钻控制房视觉工效评价模型。以CATIA作为二次开发平台，采用VB编制了司钻控制房视觉工效评价系统，实现了准确和快速定位不同百分位数人体模型眼位。最后，通过实例说明了系统的实用性，满足了司钻控制房人机界面布局可视化评估的要求。

关键词: 眼椭圆, H点, CATIA, 视觉工效, 司钻控制房

Abstract:

To solve the problem of artificial calculation and mapping error in traditional visual ergonomics evaluation, based on the analysis of the human vision characteristics, the eyellipse and H point used in the car vision design principle are introduced, and the visual ergonomics evaluation model of the oil rig driller control room is established by combining the computer aided ergonomics design technology. Taking CATIA as the secondary development platform, the visual ergonomics evaluation system of the driller control room is programmed by VB, which realizes the accurate and rapid positioning of eyes with different percentile human body model. Finally, a case illustrates that the system is practical and able to satisfy the visual assessment requirements of the humanmachine interface layout of the driller control room.

Key words: eyellipse;H point;CATIA;visual ergonomics;driller control room

邓丽1,2，余隋怀1，初建杰1，张婉玉1. 司钻控制房视觉工效评价研究[J]. J4, 2014, 36(08): 1538-1543.

DENG Li1,2，YU Suihuai1，CHU Jianjie1，ZHANG Wanyu1. Research on visual ergonomics evaluation of driller control room [J]. J4, 2014, 36(08): 1538-1543.

参考文献［16］

［1］	Chevaldonné M, Ballaz C, Mérienne F, et al. Fieldofview tests for a virtual cockpit application［J］. Journal of Electronic Imaging, 2006, 15(2):020501(1)020501(3).
［2］	Liu Wei, Yuan Xiugan, Lin Haiyan. Synthetical evaluation of ergonomics study in visual information flow system of pilots［J］. Journal of Beijing University of Aeronautics and Astronautics, 2001, 27(2):175177.(in Chinese)
［3］	SAE J9412010. Motor vehicle driver’s eye locations［S］.Warrendale:Society of Automotive Engineers, 2001.
［4］	Cho Y H, Han B K. Application of slim apillar to improve driver’s field of vision［J］. International Journal of Automotive Technology, 2010, 11(4):517524.
［5］	Ge Anlin,Ren Jindong,Huang Jinling,et al. Study on theories and methods of automobile vision design［J］. Chinese Journal of Mechanical Engineering, 2002, 38(4):148151.(in Chinese)
［6］	Ren Jindong, Fan Zijie, Huang Jinling. Eyellipse statistic method for different driver population［J］. Chinese Journal of Mechanical Engineering, 2006, 42(2):192197.(in Chinese)
［7］	Huang Jinling, Gong Lizhou, Ge Anlin. Optimization on H point in car body packaging［J］. Automotive Engineering, 2000, 22(6):368372.(in Chinese)
［8］	Xu Meng, Sun Shouqian. Progress of research on computeraided ergonomics［J］. Journal of ComputerAided Design & Computer Graphics, 2004, 16(11):14691473.(in Chinese)
［9］	Luo Shijian, Sun Shouqian, Tang Mingxi, et al. Study on computeraided ergonomics design［J］. Journal of Zhejiang University(Engineering Science), 2005, 39(6):805809.(in Chinese)
［10］	Wen Wufan. Ergonomics in automobile［M］. Changchun:Jilin Science & Technology Press, 1991.(in Chinese)
［11］	Mao Enrong. Ergonomics in vehicle engineering［M］. Beijing:Beijing Institute of Technology Press, 2007. (in Chinese)
［12］	Wen Wufan, Du Zixue. An explanation of driver’s eyellipses with twodimensional normal distribution theory［J］. Automotive Engineering, 1991, 13(4):223228.(in Chinese)
［13］	SAE J15162002. Accommodation tool reference point［S］.Warrendale:Society of Automotive Engineers, 2002.
［14］	Ruan Baoxiang, Shao Xianghua. Ergonomics in industrial design［M］. Beijing:China Machine Press, 2005.(in Chinese)
［15］	Hu Ting, Wu Lijun. CATIA secondary development technology foundation［M］. Beijing:Publishing House of Electronics Industry, 2006.(in Chinese)
［16］	Chen Bo, Li Dongyi, Zhang Jiaxin, et al. Research on adult Chinese digital human model based on CATIA V5［J］. Ergonomics, 2011, 17(1):5659.(in Chinese)
	附中文参考文献：
［2］	刘伟, 袁修干, 林海燕. 飞机驾驶员视觉信息流系统工效综合评定研究［J］. 北京航空航天大学学报, 2001, 27(2):175177.
［5］	葛安林, 任金东, 黄金陵, 等. 汽车视野设计原理和方法研究［J］. 机械工程学报, 2002, 38(4):148151.
［6］	任金东, 范子杰, 黄金陵. 适合不同驾驶员群体眼椭圆统计方法［J］. 机械工程学报, 2006, 42(2):192197.
［7］	黄金陵, 龚礼洲, 葛安林. 车身布置中H点的优化［J］. 汽车工程, 2000, 22(6):368372.
［8］	徐孟, 孙守迁. 计算机辅助人机工程研究进展［J］. 计算机辅助设计与图形学学报, 2004, 16(11):14691473.
［9］	罗仕鉴, 孙守迁, 唐明晰, 等. 计算机辅助人机工程设计研究［J］. 浙江大学学报(工学版), 2005, 39(6):805809.
［10］	温吾凡. 汽车人体工程学［M］. 长春:吉林科学技术出版社, 1991.
［11］	毛恩荣. 车辆人机工程学［M］. 北京:北京理工大学出版社, 2007.
［12］	温吾凡, 杜子学. 汽车驾驶员眼椭圆二维正态分布理论解释［J］. 汽车工程, 1991, 13(4):223228.
［14］	阮宝湘, 邵祥华. 工业设计人机工程［M］. 北京:机械工业出版社, 2005.
［15］	胡挺, 吴立军. CATIA二次开发技术基础［M］. 北京:电子工业出版社, 2006.
［16］	陈波, 李冬屹, 张茄新, 等. 基于CATIA V5的中国成年人数字人体模型研究［J］. 人类工效学, 2011, 17(1):5659.