一种基于SRT-8算法的SIMD浮点除法器的设计与实现

J4 ›› 2014, Vol. 36 ›› Issue (05): 797-803.

一种基于SRT-8算法的SIMD浮点除法器的设计与实现

邓子椰，陈书明，彭元喜，雷元武

（国防科学技术大学计算机学院，湖南长沙 410073）

收稿日期:2013-07-05 修回日期:2013-11-12 出版日期:2014-05-25 发布日期:2014-05-25

Design and implementation of a SIMD
floating-point divider based on SRT-8

DENG Ziye,CHEN Shuming,PENG Yuanxi,LEI Yuanwu

(College of Computer, National University of Defense Technology,Changsha 410073,China)

Received:2013-07-05 Revised:2013-11-12 Online:2014-05-25 Published:2014-05-25

摘要/Abstract

摘要：

在科学计算、数字信号处理、通信和图像处理等应用中，除法运算是常用的基本操作之一。基于SRT8除法算法，设计一个SIMD结构的IEEE754标准浮点除法器，在同一硬件平台上能够实现双精度浮点除法和两个并行的单精度浮点除法。通过优化SRT8迭代除法结构，提出商选择和余数加法的并行处理，并采用商数字存储技术降低迭代除法的计算延时，提高频率。同时，采用复用策略减少硬件资源开销，节省面积。实验表明，在40nm工艺下，本设计综合cell面积为18601.9681 μm2，运行频率可达2.5GHz，相对传统的SRT8实现关键延迟减少了23.81%。

关键词: SRT-8, SIMD, 浮点除法器, 双精度浮点, SIMD单精度浮点

Abstract:

In the area of scientific computing, digital signal processing, communication and image processing, division is one of the widely used basic operations. Based on SRT-8 algorithm, a SIMD floating-point divider is designed,which is compatible to IEEE-754 standard.The divider supports one double precision floating point division and two parallel single precision floating point division on the same hardware platform.It reduces the iterative division calculation time delay and improves the frequency by optimizing the SRT8 iterative division structure,choosing parallel processing of quotient and residue addition,and adopting rapid storage technique. Besides,it reduces hardware resources and saves area by adopting reuse strategy.Experiments show that the synthesized cell area is 18 601.968 1μm2 and the frequency reaches up to 2.5GHz with 40nm technology library,and the latency of operation is reduced by 23.81％ in comparison to the traditional implementation based on SRT-8.

Key words: SRT-8;SIMD;floating-point division;double precision floating-point;SIMD single precision floating-point

邓子椰，陈书明，彭元喜，雷元武. 一种基于SRT-8算法的SIMD浮点除法器的设计与实现[J]. J4, 2014, 36(05): 797-803.

DENG Ziye,CHEN Shuming,PENG Yuanxi,LEI Yuanwu. Design and implementation of a SIMD
floating-point divider based on SRT-8 [J]. J4, 2014, 36(05): 797-803.

[1]	赵永浩, 贾海鹏, 张云泉, 张思佳. 基于SIMD的Square Root函数高性能实现与优化[J]. 计算机工程与科学, 2021, 43(04): 662-669.
[2]	孙海燕. 一种支持SIMD体系结构的高效分布式堆栈——HEDSSA[J]. 计算机工程与科学, 2017, 39(11): 1986-1990.
[3]	姚文科1，杜云飞2，吴强1，杨灿群1. 基于Intel Xeon Phi的激光等离子体粒子模拟研究[J]. J4, 2014, 36(05): 809-813.
[4]	陈向，沈立. 一种面向自动向量化和数据置换操作的中间表示[J]. J4, 2012, 34(7): 71-77.
[5]	李国强,陈书明,万江华,杨惠. FT-SIMD: 一种高性能乘法器的设计[J]. J4, 2012, 34(1): 53-57.
[6]	辛乃军,陈旭灿,孙海燕,阳柳,罗杰,淡孝强,王霁. 基于GCC的高性能DSP Matrix向量指令集扩展[J]. J4, 2012, 34(1): 58-63.
[7]	吴铁彬,刘衡竹,杨惠,张剑锋,侯申. 一种快速SIMD浮点乘加器的设计与实现[J]. J4, 2012, 34(1): 69-73.
[8]	李初辉王伟肖玮. 一种共享主存二维SIMD结构资源分配算法的改进与实现[J]. J4, 2008, 30(9): 99-102.
[9]	钱兴隆臧斌宇朱传琪. 一种SIMD优化中的向量寄存器部分重用方法[J]. J4, 2007, 29(5): 141-146.
[10]	杜谋辉[1] 周媛媛[2] 余圣发[2] 林嘉宇[2]. H．264帧内预测模块在TMS320C6416上的并行实现[J]. J4, 2006, 28(11): 51-53.