[1] |
Ramesh R,Mannan M A,Poo A N.Tracking and contour error control in CNC servo systems[J].International Journal of Machine Tools & Manufacture,2005,45(3):301326.
|
[2] |
Koren Y.Crosscoupled biaxial computer controls for manufacturing systems [J].Journal of Dynamic Systems,Measurement and Control,1980,102(4): 265272.
|
[3] |
Koren Y,Lo CC.Variablegain crosscoupling controller for contouring [J].CIRP AnnalsManufacturing Technology,1991,40(1): 371374.
|
[4] |
Yang Jiangzhao,Li Zexiang.A novel contour error estimation for position loopbased crosscoupled control [J].IEEE/ASME Transactions on Mechatronics,2011,16(4): 643655.
|
[5] |
Huo Feng,Xi Xuecheng,Poo AN.Generalized taylor series expansion for freeform twodimensional contour error compensation [J].International Journal of Machine Tools and Manufacture,2012,53(1): 9199.
|
[6] |
Li Xuewei,Zhao Wanhua,Lu Bingheng.A new algorithm for contour error vector calculation used in multiaxis maching[J].Modern Manufacturing Engineering,2014(8):5054.(in Chinese)
|
[7] |
Li Peixin,Ma Yue,Yu Dong,et al.A method of realtime estimation of contouring errors[J].China Mechanical Engineering,2011,22(4): 419423.(in Chinese)
|
[8] |
Yeh Syhshiuh, Hsu Paulo. Estimation of the contouring error vector for the crosscoupled control design[J].IEEE/ASME Transactions on Mechatronics,2002,7(1):1.
|
[9] |
Chuang Huayi,Liu Changhuan. A modelreferenced adaptive control strategy for improving contour accuracy of multiaxis machine tools[J].IEEE Transactions on Industry Applications,1992,28(1): 221227.
|
[10] |
Cheng Mingyang,Lee Chengchien.Motion controller design for contourfollowing tasks based on realtime contour error estimation [J].IEEE Transactions on Industrial Electronics,2007,54(3): 16861695.
|
[11] |
Sencer B, Altintas Y, Croft E. Modeling and control of contouring errors for fiveaxis machine toolspart I: Modeling [J]. Journal of Manufacturing Science and Engineering,2009,131(3):337346.
|
[12] |
Luo Weiling,Liu Jiancheng.A new approach to the modeling and simulation of brushless DC motors based on fuzzy control[J].Computer Engineering & Science,2009,31(8): 147149.(in Chinese)
|
|
附中文参考文献:
|
[6] |
李学伟,赵万华,卢炳恒.一种多轴联动加工轮廓误差的向量计算方法[J].现代制造工程,2014(8):5054.
|
[7] |
李培新,马跃,于东,等.一种实时轮廓误差估算方法[J].中国机械工程,2011,22(4): 419423.
|
[12] |
罗维玲,刘建成.基于模糊控制的无刷直流电机建模仿真新方法[J].计算机工程与科学,2009,31(8): 147149.
|