异构装配信息的统一表达方法研究

J4 ›› 2014, Vol. 36 ›› Issue (01): 145-149.

异构装配信息的统一表达方法研究

刘云华，刘巍

（华中科技大学国家CAD支撑软件工程技术研究中心，湖北武汉 430074）

收稿日期:2012-09-13 修回日期:2012-12-29 出版日期:2014-01-25 发布日期:2014-01-25
基金资助:
国家863计划资助项目（2007AA040505）

Uniform expression of heterogeneous assembly information

LIU Yunhua,LIU Wei

(National CAD Support Software Engineering Research Center,
Huazhong University of Science and Technology,Wuhan 430074，China)

Received:2012-09-13 Revised:2012-12-29 Online:2014-01-25 Published:2014-01-25

摘要/Abstract

摘要：

异构平台三维模型的装配序列规划和运动仿真需将模型统一到同一平台。针对这一需求，提出了一种装配模型的统一表达方法，将不同CAD模型统一到相同结构的三维模型中，利用零部件层次模型和关系模型混合表达记录零部件的层次结构、装配关系、运动关系以及相关属性等，构建了统一的装配信息表达方法。同时，为了提高模型信息交换和显示的效率，采用轻量化方法来构建和表达零部件模型。

关键词: 异构平台, 统一平台, 轻量化, 装配表达

Abstract:

Assembly sequence planning and motion simulation of the threedimensional model of heterogeneous platform require the model to be unified into a same platform. Therefore, a unified expression method of assembly model is proposed. This method unifies the different CAD model into the threedimensional model of the same structure. The mixed expression of partslevel model and relationship model is used to record the hierarchical structure, the assembled relationship, the motion relationship, and the related properties, etc, and a unified assembly expression method is built. In order to improve the efficiency of the model for information exchange and display at the same time, lightweight methods are adopted to construct and express the parts model.

Key words: heterogeneous platform;unified platform;lightweight;assembly expression

刘云华，刘巍. 异构装配信息的统一表达方法研究[J]. J4, 2014, 36(01): 145-149.

LIU Yunhua,LIU Wei. Uniform expression of heterogeneous assembly information [J]. J4, 2014, 36(01): 145-149.

参考文献［8］

［1］	Peng Tao,Li Shiqi,Zhang Chonghui,et al.Information acquisition and application for the virtual assembly［J］.Computer Integrated Manufacturing Systems, 2009, 15(9):18171822.(in Chinese)
［2］	Yang Rundang,Wu Dianliang,Fan Xiumin,et al.Research on constraintbased virtual assembly technologies ［J］.Computer Integrated Manufacturing Systems,2006,12(3):414419.(in Chinese)
［3］	Liu Zhenyu，Tan Jianrong, Zhang Shuyou. The multilevel representation of product information for virtual assembly ［J］.Journal of ComputerAided Design & Computer Graphics, 2001, 13(3):224228.(in Chinese)
［4］	Dai Guohong. Research on the techniques of modeling and sequence planning for digital preassembly ［D］. Nanjing:Nanjing University of Science & Technology, 2007.(in Chinese)
［5］	van Holland W, Bronsvoort W F. Assembly features in modeling and planning ［J］. Robotics and Computer Integrated Manufacturing, 2000, 16(4):277294.
［6］	Jayaram S, Connacher H I, Lyons K W. Virtual assembly using virtual reality techniques ［J］. ComputerAided Design, 1997, 29(8):575584.
［7］	Sang Xiaochong, Zhou Hualin, Zuo Dunwen. Research on the automatically extracting technology of assembly information for virtual assembly ［J］. Manufacture Information Engineering of China, 2010, 39(19):3340.(in Chinese)
［8］	Zhang Fan. Research on the key technology for collaborative digital preassembly system［D］.Nanjing:Nanjing University of Science & Technology, 2005.(in Chinese)
	附中文参考文献：
［1］	彭涛，李世其，章崇晖，等. 面向虚拟装配的信息获取与应用［J］. 计算机集成制造系统, 2009,15(9):18171822.
［2］	杨润党，武殿梁，范秀敏，等. 基于约束的虚拟装配技术研究［J］. 计算机集成制造系统,2006,12(3):414419.
［3］	刘振宇，谭建荣，张树有. 面向虚拟装配的产品层次信息表达研究［J］. 计算机辅助设计与图形学学报, 2001,13(3):224228.
［4］	戴国洪.数字化预装配建模与序列规划技术的研究［D］.南京：南京理工大学, 2007.
［7］	桑小冲，周华林，左敦稳. 面向虚拟装配的装配信息自动提取技术的研究与实现［J］. 中国制造业信息化, 2010, 39(19):3340.
［8］	张帆. 协同数字化预装配系统的关键技术研究［D］. 南京：南京理工大学, 2005.

[1]	张建伟, 周亚同, 史宝军, 何昊, 王文. 基于SSD算法的轻量化仪器表盘检测算法[J]. 计算机工程与科学, 2022, 44(08): 1418-1425.
[2]	彭林，张鹏，方建滨，黄春，唐滔. 异构平台多流编程机制的性能模型研究[J]. 计算机工程与科学, 2019, 41(07): 1145-1154.
[3]	徐莹，徐磊，姜恺. 三维NavierStokes方程分步法的并行算法在异构平台上实现初探[J]. J4, 2012, 34(9): 33-39.
[4]	徐莹，徐磊. 三维Navier-Stokes方程的差分-谱方法混合法在GPU上的实现与优化[J]. J4, 2012, 34(8): 53-58.